Coated base paper

PLA-Coated Paper for Cup, Container and Bag Converting

PLA-coated base paper for cup, bowl, food-container and bag converting, with defined grammage options, sample trials and sample-specific evidence.

Representative jumbo paper roll on converting equipment, used as a generic coated base-paper illustration
Generic paper-industry image, shown as a representative illustration only — not a LANGMAI product, the quoted grade, or a LANGMAI facility. Source: Sammutawe / Wikimedia Commons, CC BY-SA 4.0; cropped and resized.
70–300 gsm by application±2 g/m² typical toleranceCustom roll width5 t typical MOQ200 m sample by specification

Product scope

A distinct PLA coating route with product-level approval.

PLA-coated paper should be selected around sealing, forming, barrier and documentation needs. PLA is a polymer, so this range is not described as plastic-free. Compostability and destination-market claims must be supported for the exact coated-paper grade.

Material: Paper with a PLA coating; base-paper grade, coating weight, coating side and roll dimensions are confirmed for the intended converting process.

Applications

Uses to confirm before sampling

  • Base paper for paper cups
  • Base paper for bowls and food containers
  • Base paper for paper bags
  • Custom printing, sealing and forming trials
Illustrative process diagram: a coated paper jumbo roll unwinds into a paper ribbon leading to paper cups, a bowl, a folded food container and a paper bag, representing downstream converter applications
  1. Coated jumbo roll
  2. Slitting & printing
  3. Forming & sealing
  4. Converted food packs
Illustrative process diagram generated for this page — not a product photograph, factory view or test evidence. LANGMAI supplies coated base paper; the cups, bowl, container and bag shown represent downstream converter applications, not LANGMAI products.

Reference specifications

Start with a grade or format, then approve the full specification

Reference options are not stock promises. A ±2 g/m² typical grammage tolerance applies and roll width can be customized. Dimensions, coating construction, packaging and acceptance criteria are confirmed in the approved specification before production.

ApplicationReference grammageConstruction to confirmTypical tolerance
Cup, bowl and food-container paper170–210 gsmCoating weight, side and custom roll width±2 g/m² typical
Cup, bowl and food-container paper230 / 250 / 260 / 280 / 300 gsmCoating weight, side and custom roll width±2 g/m² typical
Paper-bag base paper70 / 80 / 95 / 120 gsmCustom roll width and barrier target by bag use±2 g/m² typical

Buyer decision guide

Four checks before a quote becomes an order

Coating structure

Confirm base-paper grammage, PLA coating weight, single or double-side coating and roll dimensions.

Heat and sealing

Test the actual forming and heat-sealing process, food temperature and contact conditions before approval.

Print and adhesion

Review ink, printing, paper bonding and converting behavior on the proposed construction.

Compostability scope

EN 13432, ASTM D6400 and related claims require separate product-specific certificates or evidence; a food-contact report is not a compostability certificate.

Evidence boundary

A tested 330 gsm single-side PLA-coated reference sample

Available 2025 test evidence covers a single-side PLA-coated roll with nominal total grammage of 330 g/m², nominal PLA coating of 35 g/m² and nominal width of 975 mm. The report states that the tested items passed under the listed Chinese standards.

Evidence itemWhat it supports
Tested constructionSingle-side PLA-coated roll; 330 g/m² total; 35 g/m² PLA; 975 mm nominal width
Referenced standardsGB/T 36392-2018, GB 4806.8-2022, GB 4806.7-2023 and GB 4806.13-2023, plus the listed product standard
Tested-item coverageAppearance, dimensions, coating, leakage, sensory, migration, heavy metals and other listed items
Evidence boundaryApplies to the tested sample; it does not by itself establish EN 13432 or ASTM D6400 certification

Supplier and report-holder identities are handled confidentially during buyer document review. Public claims remain limited to the relevant product and tested scope.

Production & commercial terms

Typical tolerance, width, MOQ, lead time and samples

These are general planning figures for the two coated base-paper grades, not unconditional commitments. The written specification and quotation state the confirmed figures for each order.

Grammage tolerance

Typical grammage tolerance is ±2 g/m². The accepted tolerance for the specific grade is recorded in the approved specification and written quotation.

Roll width

Roll width can be customized to the converter's required dimension. The 960 mm and 975 mm widths in the available test reports are the nominal widths of those tested samples, not a limit on custom widths.

MOQ

MOQ generally starts at 5 tonnes for coated base paper. The confirmed quantity depends on the selected grade, customization, packaging and order structure and is stated in the written quotation.

Lead time

Lead time depends on the order quantity and production schedule. It is confirmed in the written quotation rather than published as a fixed number of days.

Sample route

A 200 m sample length can be provided in any requested specification. Confirm base-paper grammage, PLA coating, width and shipping arrangements before dispatch.

Written approval

The quotation and order should identify the approved product, grammage tolerance, dimensions, material or coating, print, packing, documents and delivery terms.

Application path

Continue with a solution review

Move from an individual item to the converting or assortment decision that determines the right specification.

Request a quote or sample

Send a specification-led inquiry

Include the application, reference option, dimensions or grammage, coating or thickness, quantity, destination market, packaging and required documents. For coated-paper samples, add the required width and 200 m sample request.

Please complete the required fields. Your inquiry will be sent securely to our sales inbox.

FAQ

PLA-Coated Paper FAQ

Is PLA-coated paper plastic-free?

No. PLA is a polymer. The accurate description is PLA-coated paper, with claims limited to the exact product evidence.

What MOQ applies to PLA-coated paper?

MOQ generally starts at 5 tonnes for coated base paper. The confirmed quantity depends on the selected grade, customization, packaging and order structure and is stated in the written quotation.

Can we specify a custom roll width and tolerance?

Yes. Roll width can be customized to the converter's required dimension. The 960 mm and 975 mm widths in the available test reports are the nominal widths of those tested samples, not a limit on custom widths. Typical grammage tolerance is ±2 g/m². The accepted tolerance for the specific grade is recorded in the approved specification and written quotation.

How is lead time determined?

Lead time depends on the order quantity and production schedule. It is confirmed in the written quotation rather than published as a fixed number of days.

Can we request a custom 200 m sample?

Yes. A 200 m sample length can be provided in any requested specification after the construction, width and shipment details are confirmed.

Does the food-contact test report prove compostability?

No. Food-contact testing and compostability certification are different evidence routes. EN 13432 or ASTM D6400 coverage must be verified separately.

Related coated-paper options

WhatsApp
FacebookInstagram